EN856-4SP high-pressure pipe is a pipe used to transport liquids (such as oil, water, hydraulic oil, etc.) and is widely used in industry, agriculture, construction, machinery and other fields. Its main uses include:
1. Hydraulic system: EN856-4SP high-pressure pipe can be used in hydraulic systems to transport hydraulic oil or hydraulic fluid, such as excavators, forklifts, construction machinery, etc.
2. Car washing equipment: EN856-4SP high-pressure pipe can be used in high-pressure car washing equipment to transport high-pressure water flow to clean cars, machinery and equipment, buildings, etc.
3. Fire-fighting equipment: EN856-4SP high-pressure pipe can be used in fire-fighting equipment to transport fire-fighting water, foam liquid, etc. for fire-fighting rescue work.
When using EN856-4SP high-pressure pipe, you need to pay attention to the following matters:
1. Pipe installation: The installation of EN856-4SP high-pressure pipes must comply with relevant standards and specifications. Before installation, check whether the pipes and joints are damaged to ensure the quality of the installation.
2. Use of pipelines: During the use of pipelines, you need to pay attention to whether the pipelines are affected by impact, wear, etc. Especially in high-pressure working environments, you need to regularly check the status of the pipelines.
3. Pipeline maintenance:
EN856-4SP high-pressure pipes require regular maintenance, such as replacing seals, checking whether pipe joints are loose, etc., to ensure the sealing and safety of the pipes.
4. Pipe storage: When storing pipes, it is necessary to avoid direct sunlight, high temperature, humidity and other environments to avoid aging, deformation, etc. of the pipes from affecting their service life.
The above are the uses and precautions of EN856-4SP high-pressure pipe. When using it, it needs to be operated in strict accordance with relevant specifications and standards to ensure the safety and service life of the pipeline.
EN856-4SP high-pressure pipe joints are generally divided into several types: internal thread joints, external thread joints, flange joints and clamp joints. Here is a brief introduction to them:
1. Female thread connector: Female thread connector is generally used to connect EN856-4SP high-pressure pipes and high-pressure water pumps and other equipment. They are easy to use and have tight connections that make them less likely to leak.
2. External thread connector: External thread connector is generally used to connect EN856-4SP high-pressure pipes and nozzles and other equipment. They hold the nozzle well and are tightly connected, making it less likely to leak.
3. Flange joint: Flange joints are generally used to connect
EN856-4SP high-pressure pipes and pipelines and other equipment. They make a good connection between two pipes and can be sealed by adding a gasket.
4. Clamp joints: Clamp joints are generally used to connect EN856-4SP high-pressure pipes and pipelines and other equipment. They maintain a tight seal by clamping down on the pipe and can be quickly removed and replaced as needed.
It should be noted that when selecting joints for EN856-4SP high-pressure pipes, it is necessary to select the appropriate joint type according to the diameter, pressure and other parameters of the pipe, and ensure that the joints are of reliable quality and comply with relevant standards to ensure the safety and safety of the pipe connection. Tightness.
